The GoodWe EH 3.6 kW (GW3600-EH) is a high-voltage (HV) single-phase hybrid inverter with 2 MPPT, designed to maximize self-consumption and provide UPS-type backup to priority loads in homes. Its power electronics deliver high efficiency, a wide tracking range, and silent operation for demanding residential installations.
Key Features
- 2× MPPT architecture (1 string per MPPT) for two orientations or inclinations.
- HV battery with high DC bus for improved charge/discharge performance.
- Backup <10 ms for continuity on critical circuits (backup mode).
- Integrated protections (SPD, anti-islanding, insulation monitoring, etc.).
- IP65 for outdoor use, convection cooling, and low noise level.
Main Electrical Data
- Nominal AC power: 3.6 kW (3.6 kVA).
- Topology: single-phase 230 V; 50/60 Hz, configurable PF.
- PV inputs: 2 MPPT; wide operating range for stable production.
- Battery: high voltage (HV) with BMS management and bidirectional control.
- Backup: dedicated output for critical loads with fast switching.
Communications and Monitoring
- With BMS: CAN/RS485 (depending on battery bank).
- With meter: RS485 for export control (zero feed-in).
- GoodWe portal/app for commissioning, diagnostics, and remote O&M.
Installation and O&M
- Wall mounting, clear wiring, and integrated DC switch.
- Commissioning assistant via app; remote firmware updates.
- Minimal maintenance plan thanks to fanless and IP65 design.
Dimensions and Weight
- Dimensions (W × H × D): N/A
- Weight: N/A
Recommended Applications
- Homes with photovoltaic installation and self-consumption priority.
- Users requiring continuity on essential circuits (backup).
Note for installers: size the PV array and HV battery bank according to consumption profile; enable export control if required by local regulations and verify protection selectivity in the backup circuit.