The EcoFlow Emergency Button (ref. 5008604006) is a large emergency stop push button that allows you to immediately interrupt the power supply to the connected EcoFlow system (inverter, storage, smart home panel, etc.). Its mushroom-style design makes it easy to locate and operate in hazardous situations, providing an extra layer of safety to your setup.
Features and Benefits
- Emergency stop of the system with a single press.
- Dry contact to send the shutdown/isolation command to compatible equipment.
- Mechanical latching: remains engaged until reset.
- High visibility (red color) and intuitive operation.
- Wall installation near the panel or quick access area.
Compatibility
- Accessory for EcoFlow ecosystem systems (e.g., PowerOcean inverters, smart home panel, and other devices compatible with stop input by contact).
- Connection is made via dry contact (stop signal input). Check the target device’s wiring diagram.
Installation and Safety
- Installation by an authorized technician following the EcoFlow diagram.
- Place in a visible and accessible location for users.
- Label the button’s function and train building users.
- Test operation after installation and during regular maintenance.
Main Technical Data
- Device type: emergency push button with latching and manual reset (turn or pull, depending on version).
- Electrical interface: dry contact output (voltage-free); dedicated terminals.
- Protection rating: N/A (check manufacturer’s datasheet for indoor/outdoor use).
Dimensions and Weight
- Dimensions (W × H × D): N/A
- Weight: N/A
Recommended Applications
- Homes and small businesses with EcoFlow systems connected to the grid and/or backup.
- Installations requiring an accessible stop point for non-technical users.
Note for installers: verify signal compatibility with the target EcoFlow device, use appropriate wiring and gauge for the control line, and record the button’s location in the installation documentation. The button does not physically cut power by itself unless connected to the system’s stop input; its function is to send the shutdown/isolation command.